1
00:00:00,610 --> 00:00:07,560
In this video I'm going to show you how to configure a router on a stick or an external router that's

2
00:00:07,560 --> 00:00:13,830
connected to allow you to switch that performs that into villaine rodding to allow devices in one line

3
00:00:14,220 --> 00:00:21,300
to communicate with devices in another villaine the typology that we're going to build consists of two

4
00:00:22,290 --> 00:00:23,500
devices.

5
00:00:23,820 --> 00:00:29,490
PC one will configure with an IP address of 10 at one to two to one and the default gateway will be

6
00:00:29,610 --> 00:00:38,610
Rotto one with 10 to 1 to 2 2 5 4 in land to pc 2 will be configured with an IP address of 10 to 1 to

7
00:00:38,700 --> 00:00:49,710
3 to 1 slushed 24 default gateways router 1 IP address 10 1 2 3 2 5 4 in line 3.

8
00:00:49,710 --> 00:00:57,330
So this router will use an 8 to 1 queue trunk to the switch and do the interview LAN rotting so that

9
00:00:57,330 --> 00:01:00,270
a PC one can ping PC to.

10
00:01:00,540 --> 00:01:06,260
In other words we are into Villiam writing between villaine too and we learnt three.

11
00:01:06,300 --> 00:01:16,800
So I've started a new project called Track a Rodda into the workspace and grab an Ethernet switch as

12
00:01:16,800 --> 00:01:23,360
well as TV PC devices.

13
00:01:23,380 --> 00:01:32,950
Now when you start configure it to switch and delete all current interfaces that are all going to be

14
00:01:32,950 --> 00:01:36,590
in VLAN 1 and are going to be configured as access ports.

15
00:01:36,640 --> 00:01:43,640
So we want to start with a new switch configuration support one is going to be an access port in villain

16
00:01:43,660 --> 00:01:53,830
to port two is going to be an access port in violent three port three is going to be a trunk port and

17
00:01:53,830 --> 00:01:57,820
we're going to configure the native villaine as the LAN one.

18
00:01:57,820 --> 00:02:04,120
So that's a switch configuration port one isn't beelined to port today and we land three access ports

19
00:02:04,120 --> 00:02:08,360
port three is going to be an attitude of one queue trunk.

20
00:02:08,540 --> 00:02:15,730
I can now configure the devices and connect them to the switch so fast.

21
00:02:15,740 --> 00:02:22,310
Ethan it is 0 0 0 on our Rodda will be configured into villaine routing

22
00:02:26,090 --> 00:02:32,230
so this host will configures 10 to 1 to 2 1 slushed 24 in violent to

23
00:02:35,390 --> 00:02:40,190
the host we will configure as 12:57 in violent three

24
00:02:43,160 --> 00:02:46,210
and the Rodda

25
00:02:48,970 --> 00:03:02,650
will be to five full in the relevant villans also configure villaine one as the native land on fast

26
00:03:02,690 --> 00:03:06,640
Ethernet 00 on the router.

27
00:03:06,640 --> 00:03:12,140
Now you can obviously make the topology more pretty for lack of a better word.

28
00:03:12,220 --> 00:03:14,700
I'm not going to do that for the sake of time.

29
00:03:14,800 --> 00:03:16,480
So start the devices up

30
00:03:20,550 --> 00:03:25,020
and open console ports to the devices.