In this video we're going to discuss how you can implement HPV 6 addresses on hosts as an example you
can use stateless address order configuration or slack to dynamically allocate IP addresses to hosts.
You could use DHEA P to allocate IP addresses to host pieces.
There are a lot of very similar concepts between IP version 6 and IP version 4 as an example an IP version
6.
You have an IP address in the same way that you have an IP address and IP version for you have a default
gateway or default.
Rhoda you have a subnet mask or prefix lengths and you have a DNS servers IP version 6 in a similar
way to IP version for needs to dynamically learn MAC addresses but IP Virgin for users OP and broadcasts
to discover MAC addresses broadcasts on supported an IP version 6.
So OP can't be used.
So a different protocol needs to be used to discover the MAC addresses of other devices on Ethernet
IP version 6 pieces and hosts use enabled Discovery Protocol instead of OP.
This is used by devices on the same subnet.
In other words neighbors to discover and exchange information.
One of the big protocols that it replaces is the OP protocol used in IP version four.
So again you can allocate IP addresses to IP version 6 hosts either by configuring them aesthetically
or using a dynamic allocation process with DHEA P or dynamic Host Configuration Protocol or you could
use stateless address order configuration or slack to allocate IP addresses to pieces IP version 6 hosts
require an IP address to communicate they need to know what they subnet mask is they need to know what
their default gateways and they need to know what to their DNS server is so that they can resolve names
to IP addresses.